Steel Door Frames Roll Forming Machine

Steel Door Frames Roll Forming Machine is used to produced steel door frame.Actually,the door frame is a channel which can fix the door with the wall closely to make the door embed in the wall very strongly.

The Door Frame Roll Forming Machine include the following parts:

Uncoiler, the leveling , the punching system , the main roll forming machine ,cutting system and the receiving table. It also needs 45 degree cutting system for the 45 door frame forming system.

These Door Frame Making Machine can be customized as per customer requirement. It is mostly known for its stability and superiority.

1. Door Frame Producting Process Flow

Decoiler- Feeding and Leveling device- Main Roll Forming System- PLC Control System- Hydraulic Punching and Cutting device- Discharge table.

2. Machine Parameter

2.1 Raw Material

A. Suitable Material: Colored Steel Plate, Galvanized Board, Aluminum Plate;

B. Width of the raw material: 290 mm;

C. Thickness: 0.8mm - 1.5mm;

2.2 Main Body

A. Roller station: 17 rows;

B. Diameter of shaft: ￠80mm, 45# steel;

C. Roller material: 45# steel;

D. Frame: 350 H steel;

E. Operate: Manual and Automatic;

F. Working speed: 8 - 10 m/min;

G. Size (L*W*H): about 8200*1250*1600 mm;

2.3 Power

A. Motor power: 5.5 Kw, Hydraulic power: 4 Kw;

B. Voltage: 380V 50Hz 3Phases or Customization;

C. Driving way: 1.5 inch Chain

3. Components of machine

3.1 Manual Deciler

It is uesd to support the steel coil and uncoill it in a turnable way. Loading capacity: 1.2T , Inner diameter: 300-500 mm.

3.2 Feeding Table and Leveling Device

Feeding Table: It is used to control the width and position of the steel sheet. The sheet is guided into the machine with correct position, to make sure the panel is neat and parallel.

Leveling device: It used for making the material flat before feeding into the roll forming machine.

3.3 Main roll forming system

The roller surfaces is polishing and hard plating, the polished and heat treatment towards the molds also can keep the molding plate surface smooth and not easy to marked when it is being stamped.

3.4 Hydraulic system

It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job.

3.5 PLC Control Cabinet

The target piece's length is adjustable and digit of it can be adjusted. This computed mode has two type, one is manual, the other one is automatic. So you can operate it by any mode that you want to.

3.6 Shearing Mechanism

It adopts the hydraulic drive and automatic location to decide the length and cut the target products. Material of blade: Cr12, quenching treatment.

3.7 Discharge table

It adopts welded steel and supported roller to transmit the products, which is uesd to collect the finished products. The length of this discharge is 6 meters.

3.8 Spare Part

One box for free.

4. More Pictures Of Machine

5. Packing and Shipping

For this machine need 1*40 GP container to load, one container can load 2 sets machines normally.

Before loading to container, we will check and test machine frist.

Second, make some protection on the machine. Such as, we will make the plastic package on the easy damage parts, paint the oil on the roller and shaft, in case the roller and shaft got corrosion and rusty during long time delievery.

Third, we will fix all the parts into container by steel wire rope. And ensure the machine will not damage when shaking on sea.

At last, we will take phoots and videos for customer when loading to container, so that the customer can take out the machine easily when receive the goods.

Company information

Kaiyite machinery is a leading manufacture of roll forming machine . We know well the particular requirements for the customers from different countries , and have an outstanding export team who will take your requests . Our experts and skilled workers complete the work with great precision .

We provide an extensive line of products , including Roller Shutter Door Roll Forming Machine , Door Frame Machine , Roof And Wall Panel Roll Forming Machine , Double Layer Roll Forming Machine , Floor Deck Roll Forming Machine ,C / Z / U Purlin Roll Forming Machine , Stud And Track Roll Forming Machine , Ridge Cap Roll Forming Machine , Downspout Pipe Roll Forming Machine , Shearing Machine And Bending Machine , Slitting And Cutting Machine .

6. Contact Information

Looking for ideal Door Frame Roll Forming Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Steel Door Frame Roll Forming Machine are quality guaranteed. We are China Origin Factory of Door Roll Forming Machine. If you have any question, please feel free to contact us.

Product Categories : Door Frame Roll Forming Machine